Yeah, I dry my filament (especially PETG) with one of those too. I don’t have to use glue, it just makes PETG easier to remove from the plate. Otherwise it can stick to the plate too well (had a case where I removed the model with some of the PEI coating).
I’m actually using spray glue (3dlac) usually with a textured PEI (rarely a smooth PEI) plate. I’m also using PET/PEO (double sided) plate with PETG (without glue) - adhesion is really good, but not too good (so it’s easy to clean).
3 things that help me with PETG when it comes to separate it from the plate:
I think I was getting Jayo PETG from AliExpress. As for PCTG it was from Rosa3D - you can get it directly from them or through Allegro
I’ve printed a lot of Jayo PETG, and aside from having to dry it before use, it was fine (and very cheap).
Im Poland you can get PETG for <30 zł, PCTG for ~80. PETG-CF for a little bit more than the plain one.
I am aware of that, but usually Jayo branded filament is cheaper ;)
I’ve used both. PCTG is much more expensive than PETG (which is one of the filaments you can get very cheap), and does not offer that much over it. Unless you need something with (very slightly) better impact and temperature resistance PETG is way to go. If you need much better impact/temperature resistance ASA/PA is the way to go. I’m using PETG+CF if I need more durability and temperature resistance than the plain one, but avoid CF for stuff I have to touch a lot.
Eryone and Jayo are pretty good (and cheap) too. I didn’t have issues with Tecbears PLA I got from Amazon
Yup, try PETG, it’s pretty versatile and resistant to most things (aside from very high temperatures).
Try it, I was thinking the same thing once and it did turn out to be the case
Any chance your z-offset is making the nozzle too close to the plate/too high flow rate for it?
5 people demanding something is not an actual demand in this context;)
I’m not saying you do - just implying it’s pointless
lol, good luck with that. First of all it doesn’t really affect them commercially, second - there’s no single version/distribution to support.
There are also scripts to unlock upgrade on „unsupported” processors which still technically work with 11
Pressure them about what exactly? Making the product for Linux or extending Windows 10 support?
Less overhangs?
Exactly what I’m talking about, this is why I’m using glue. If you’re talking about a textured plate it’s probably PEI